SHAKE WELL before use. Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Turtle Wax Polishing Compound out of direct sunlight.
Use a soft foam polishing pad. Mist pad with water to prime. Apply four pea-sized amounts at the 12, 3, 6 and 9 o’clock positions of the pad. With the polisher turned off, spread the polish over about a 2 x 2 sq ft area.
Polish at 600 – 1200 RPM (4500 – 5000 OPM with a dual action polisher), working slowly across, then up and down, the area. Check your work after several passes to see if the swirls have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
Wipe the area with a damp microfiber cloth.
Always apply a Turtle Wax sealant, coating and or wax after compounding or polishing.